Wavecom FASTRACK M1306B User's Guide download pdf (Page 28)

Fastrack M1306B User Guide

Using the M1306B Wireless CPU

5 Using the M1306B Wireless CPU

5.1 Getting Started

5.1.1 Mount the M1306B

To mount the M1306B on its support, bind it using the holding bridles as shown in

the Figure 10 below.

Figure 10: M1306B mounting

For the drill template, refer to Figure 16.

5.1.2 Set up the M1306B

To set up the M1306B, perform the following operations:

• Press SIM card holder ejector with a sharp object (for example, the tip of a

pen).

• Insert the SIM card in the holder.

• Verify the SIM card fits in the holder properly.

• Insert the holder in the M1306B.

• Connect the antenna to the SMA connector.

• Connect both sides of the serial and control cable (15-pin Sub HD connector on

the M1306B side).

• Connect the power supply cable to the external power supply source.

This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged

without prior written agreement.

WM_PRJ_M13_UGD_001 -003 November 11, 2006

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 66 67

No comments

Wavecom FASTRACK M1306B User's Guide Page 28