Wavecom WMOi3 Service Manual

Operating instructionComuCont DualComuCont Dual documentation_eg.DOCDate: 28.03.2001 15:56:00

103.6 LEDs / SIM-card plug3.6.1 SIM-cardOpen the device lid to plug in the SIM_card. The radio-modem is installed perpendicular to the motherboa

Seite 114 InstallationFor installation, proceed as follows:1. Plug in the SIM-card2. Plug in/Installation of the radio antenna3. Plug in the serial po

125 ComuCont Dual-coreThe functionality of the WaveCom WMOi3 Engine is extended via the ComuCont Dual-core. The core consists of a 8051 processor, a

Seite 135.1.4 Display of a radio linkAs soon as a radio-modem-link is established, the function of the field strength display will be deactivated. The

145.2.5 Call-noteAs soon as the code protection against unauthorized access to the data terminals is activated, a call-note can be made.

Seite 155.3.2 Connect-Login-ModeIf the code for the protection against unauthorized access to the data terminals is activated, the device is in this m

165.4 Required settings/Information for the control stationThe control station has 3 possibilities to transfer data to or from a data terminal connect

Seite 175.5 ParameterizationParameterization is done line-oriented, i.e. a command line has to be closed down by CR. Thte ComuCont Dual requires th

18Command-Format Effect Default valueRRVOutput of the number of recall-trails in the next line.WHAxSelection of the radio-netx: 0 = any operator

Seite 196 Technical dataSerial interfaces- V24/RS232- RS485 or- CL (TTY 20mA) 2- or 4-wire - active or passive - according to EN 61107Coverage of exte

Seite 3Contents1 INTRODUCTION ...

41 IntroductionAs radio core, the ComuCont Dual contains the WaveCom WMOi3 or Siemens TC35 Engine. Besides the descriptions in this instruction

Seite 53 PortAt the modem, there is a block with 36 screw terminals• for the interface RS232• for the interface CL (TTY) 2 and 4 wire• for the interfa

63.3.1 V24-port with power supply for readout topComuCont Dual readout top+5V 1GND 13RXD 25TXD 26+5VGNDRXDTXD3.3.2 V24-port to PC Sub-D 9- pole withou

Seite 73.5 CL / TTY interface3.5.1 Wiring plan of the CL / TTY interfaceNote: In the following tables, the functions of the Pins are indicated accordi

83.5.2 active CL / TTYPin No. Function Function 4D-activeFunction 2D-activePin Type 4 TX_I+ TX-24V (TX+) Nc out 5 RX_I+ RX-24V (RX+) RX (TX) out6 +5V

Seite 93.5.6 passive CL / TTYPin No. Function Function 4D-passiveFunction 2D-passivePin Type 4 TX_I+ nc nc out 5 RX_I+ Nc nc Out6 +5V +5V +5V out powe